ECO DYNAMIC - CEM III/B 42,5 N - LH/SR - BLAST FURNACE
BLAST FURNACE CEMENT WITH LOW HEAT OF HYDRATION AND SULFATE RESISTING
Uses
- Reinforced concrete for in-ground and above-ground works, requiring high final strength
- Concrete for foundations and works in aggressive environments
- Concrete in contact with seawater- Port works
- Concrete for massive pours requiring the controlled development of the heat of hydration
- Concrete for road and rail works, including paving
- Wet-process sprayed concrete for tunnel linings
- Sewage works
Technical documents download
Click to download the document
| PLANT OR STORE | Declaration of Performance |
CE MARK | Water-soluble chromium (VI) content |
IAS Valuation |
SAFETY DATA SHEET |
EPD Certification | EPD CEMENTO SFUSO |
|---|---|---|---|---|---|---|---|
| Gubbio (PG) |
|
|
|
|
|
|
|
| Sesto Campano (IS) |
|
|
|
|
|
|
|
| Ragusa |
|
|
|
|
|
|
|
DoP Archive
Standard requirements
According to EN 197-1
| Chemical requirements | Physical requirements | Mechanical requirements |
|---|---|---|
| loss on ignition ≤ 5,0 % | initial setting time ≥ 60 min | early compressive strength (2 days) ≥ 10,0 MPa |
| insoluble residue ≤ 5,0 % | heat of hydration ≤ 270 J/g | standard compressive strength (28 days) ≥ 42,5 MPa and ≤ 62,5 MPa |
| sulfates (as SO3) ≤ 3,5 % | soundness (expansion) ≤ 10 mm | |
| chlorides ≤ 0,10 % |
* per il CEM III/B 42,5 N – LH/SR prodotto a Ragusa limite per cloruri ≤ 0,20 %.